Services · Fractured wells
Fracture diagnostics & post-frac evaluation
From the breakdown and DFIT to the post-frac build-up, we interpret the pressure data that tells you whether the fracture you pumped is the fracture you got.
Why it matters
Design better fracs. Prove what you created.
Pressure transient analysis turns fracture diagnostics and post-frac data into numbers you can use — for the next treatment design and for the reservoir model.
- Interpret DFIT, minifrac and ACA data for a better main-frac design
- Quantify fracture half-length, conductivity and frac-face damage
- Compare the actual fracture with the design
- Track fracture performance over the life of the well
What we deliver
Before, during and after the treatment
Pre-frac diagnostics
- DFIT, ACA, SRT, minifrac and breakdown interpretation
- Closure pressure, leak-off and reservoir permeability
- Direct support to your frac engineer
Data acquisition
- Acquisition plans that make post-frac data interpretable
- Gauge selection, durations and sequencing
Post-frac evaluation
- Fracture half-length, conductivity and damage
- Reservoir permeability
- Fracture performance monitored over time
Planning a well test?
Design a test that answers your questions
Tell us your objectives. We’ll design a test that meets them with minimum rig time and flaring — and support you during operations.
Already have pressure & rate data?
Get it analysed by specialists
Need an interpretation, a re-analysis with deconvolution, or a second opinion on an existing report? Send us the data securely and we’ll tell you what it can reveal.
Contact
Planning a frac campaign?
Tell us about the well, your objectives and your timeline. You’ll hear back from one of our specialists.